December 2, 2022

A Note On How To Fix An Operating System Not Found During Computer Startup

PC problems? Solve them in minutes.

  • 1. Open the ASR Pro software
  • 2. Click on "Start scan"
  • 3. Click on "Repair now" to start the repair process
  • Increase your computer's efficiency with this reliable software download.

    If you’re getting a “System Not Found” error when you start your computer, today’s user guide should help. Restart your computer. The operating system not found error should be a temporary error that a good reboot will fix. Boot into the BIOS and make sure the impossible drive where the operating system is installed is listed as the boot device at startup. If not, reschedule the load order to launch the game.

    Get a solution to your operating system not found error or download for Windows XP, Vista, 7, 3, 8.1, or Windows 10.

    This error is very common even on Sony VIO laptops including ulT-series and S-series trabucks.

    About “OS Not Found”

    How do you fix a computer that says no operating system found?

    Check BIOS.Reset the main BIOS.Recovery of boot records. Microsoft Windows primarily uses three sets of information to boot a computer.Enable or disable UEFI Secure Boot.Activate some Windows partition.Use Easy Recovery Essentials.

    The information that follows briefly about this error was compiled recently by NeoSmart Technologies based on information simply collected and provided by our worldwide network of engineers, programmers, technicians and/or partner organizations.

    Error Description And Symptoms

    The following messages, warnings, warnings, and symptoms are associated with this error.

    Symptom 1: “Even OS Not Found” Error Screen On Startup

    How do I fix a missing operating system boot?

    Solution 1 – Choose the correct boot deviceSolution 2 – Repair BCDSolution 3 – Activate the primary partitionSolution 4 – Check the connection to the extreme driveSolution 5 – Change the SATA process and use USB 2.0Solution 6 – Install a new Windows

    When you boot your PC, the BIOS tries to find a suitable operating system on a hard-to-boot drive. However, if it cannot find it, then literally 1 “OS not found” error will appear. This could be due to a BIOS configuration error, a certain bad hard drive, or a corrupt MBR.

    Operating system not only found

    Another possible error message is the ‘System Missing’ operation. This error also occurs on regular Sony Vaio laptops.

    Reason For This Error

    This error is often due to one of the following reasons:

    Personal reason: no correct BIOS configuration

    Because this error occurs when the BIOS cannot detect the operating system, it is often recommended to check the BIOS settings first. The BIOS setup can become erratic due to hardware failures, bugs, and/or manual BIOS setup errors.

    Reason 2: BCD is corrupted

    PC problems? Solve them in minutes.

    ASR Pro is the ultimate repair tool for your PC. Not only does it diagnoses and repairs various Windows issues, but it also increases system performance, optimizes memory, improves security and fine tunes your PC for maximum reliability - all with a simple download and install. Trust ASR Pro to get your PC back up and running in no time!

  • 1. Open the ASR Pro software
  • 2. Click on "Start scan"
  • 3. Click on "Repair now" to start the repair process

  • Similar to the errors described in those articles or blog posts that the BCD is unknown and the BCD is corrupted, errors can also occur when the BCD is corrupted.

    Reason 3: Faulty file cables

    If the BIOS can’t detect the hard drive, bad bandwidth cables are often the culprit. Try disconnecting them and then reconnecting or even replacing them all and see if the problem persists.

    Fix “OS Not Found” On Windows

    computer startup operating system not found

    Requires a Windows installation CD/DVD!
    Some poor quality solutions require the use of most Microsoft Windows installation CDs or DVDs. If your PC does not come with a Windows installation disc or you no longer have custom Windows installation media, you can use Easy Recovery Essentials for Windows instead. EasyRE automaticKI finds and fixes problems, and can also be ported to solve this problem using the instructions below.

    Fix #1: Recovery With Bcd Easy Recovery Essentials

    One-click Easy Recovery Essentials Automatic System Repair fixes broken BCD issues by recreating them on the active boot partition. This happens automatically as part of the automated recovery process, but does not require manual or human intervention.

    Fix #2: Change Or Reset BIOS Configuration

    Since this error often occurs when the BIOS can’t find a persistent disk, checking the BIOS settings seems like a good solution.

    1. Restart your computer
    2. Press each required key to open the BIOS card. This key depends on the computer system manufacturer and computer model. Undoubtedly, this is usually indicated on the first touch screen that appears on the monitor. It can be one of the following values: Esc, Delete, F2, F8, F10< / kbd> or just F12.
    3. If on eqThe wound has several suggestions, find the key to read "BIOS", "Setup" or "BIOS Menu"
    4. Check the main BIOS screen to make sure it recognizes the hard drive and check the current boot order to make sure it's set correctly.

    Here are sample screenshots of the main BIOS screen with the hard drive and CD-ROM recognized correctly again, and the snow clearing screen with the tricky drive in the first position.


    If the hard drive is not recognized successfully, replace the data cables or reset the BIOS settings to non-numeric values. Here are the steps to reset BIOS settings:

    1. Enter the BIOS browser by following the steps above.
    2. Look for the Restore Defaults or Set Defaults option. This can usually be a hot key or a menu operation.
    3. Select "Reset investments" and answer "yes" to the confirmation request.
    4. Then select the "Exit -> Exit Save Changes" option.

    Fix #3: Run A Restore

    computer startup operating system not found

    Windows Automatic Repair in some cases recovers perfectlyinjects some inconsistencies related to loading. Here are your current steps to access Automatic Repair from your installation CD:

    1. Booting from the Windows installation CD
    2. Click "Next" on the welcome page after selecting the correct language, keyboard, and input.
    3. Click Repair your computer and select Troubleshoot.
    4. Click More Options
    5. Select Automatic Repair and select your system.

    Here is an example of solutions where PC startup repair should be visually pleasing if the Bootmgr file is restored correctly:

    Fix #4: Rebuild BCD With Bootrec.exe

    Just like there is no BOOTMGR error, restoring your computer's BCD will likely fix boot problems.

    1. Boot from Windows installation CD
    2. Click "Repair All Computers" after selecting the appropriate language, free time, and keyboard input.
    3. Select your Windows installation drive, typically C:, then click Next.
    4. Select Commandthis line" when the general "System Recovery Options" window appears.
    5. Increase your computer's efficiency with this reliable software download.

      Datorns Startoperativsystem Hittades Inte
      Computer Opstarten Besturingssysteem Niet Gevonden
      Computerstart Betriebssystem Nicht Gefunden
      컴퓨터 시작 운영 체제를 찾을 수 없습니다
      Systeme D Exploitation De Demarrage De L Ordinateur Introuvable
      Sistema Operativo Di Avvio Del Computer Non Trovato
      No Se Encuentra El Sistema Operativo De Inicio De La Computadora
      Nie Znaleziono Systemu Operacyjnego Startowego Komputera
      Sistema Operacional De Inicializacao Do Computador Nao Encontrado
      Operacionnaya Sistema Pri Zapuske Kompyutera Ne Najdena